VLine2 doesn’t power on every time the car is started

[jmeyendorff]

I recently installed the VL2 in my 2013 200 series Land Cruiser and the unit works great, when it works. The problem is that the VL2 doesn’t start every time the car starts. The screen just stays black and it’s not available to connect by Bluetooth. All of the factory functions work fine. The only way to get the vline to power up is to turn the vehicle off for 10+ minutes and restart.

[admin]

Please check if there is a firmware update is available. Go to Support --> Check for Firmware Update The VLine must be connected to the internet for the purpose of firmware update.

Please perform the firmware update if available. If the problem will persist, please contact our technical team at https://gromaudio.com/support.html They will help.