Equinox2014
New member
Every so often - the source "IPOD" is not detected which was the channel the VLINE would play audio through is lost. Only way to recover is do a hard power reset on the controller. Any ideas?
2014 Equinox - Loosing Audio Source - Requires Reboot of VLINE Controller
- Thread starter Equinox2014
- Start date
Try to update the system to the latest available firmware and see if that will help. Here is how to:
https://youtu.be/UrQ2TWJ5v1Q
If after the firmware update you will keep experiencing difficulties, please contact our technical team at https://gromaudio.com/support.html and we will review further.
https://youtu.be/UrQ2TWJ5v1Q
If after the firmware update you will keep experiencing difficulties, please contact our technical team at https://gromaudio.com/support.html and we will review further.
Equinox2014
New member
Sorry for the late response. I’ve updated the what was the latest update available after your reply. But the issue persists.
It seems like the myLink OS on GM doesn’t recognize the controller on that source and requires a hard reboot every time.
It seems like the myLink OS on GM doesn’t recognize the controller on that source and requires a hard reboot every time.
Please contact our technical team at https://gromaudio.com/support.html We will help!