I have a 2019 Toyota Land Cruiser paired with Apple iPhone 11 running IOS26.2. I choose to tether my phone to the car with USB whenever in the car for two reasons: 1) to facilitate ongoing phone charging; 2) I read here that GROM doesn't play nice using Bluetooth with CarPlay. Then, my other issue is that my car stereo always launches by going straight to the native Toyota map. Any advice to solving these problems? Thanks in advance.
Disabling Toyota Native Maps?
- Thread starter MartyD
- Start date
Try the following:
While in VLine Main UI Screen, tap on the hamburger menu in the upper left corner.
Go to VLine Settings --> Vehicle Integration and tap on "Show VLine After Reverse".
Once this setting is enabled, the stereo will return to VLine user interface after the reverse.
Let us know if that helped!
While in VLine Main UI Screen, tap on the hamburger menu in the upper left corner.
Go to VLine Settings --> Vehicle Integration and tap on "Show VLine After Reverse".
Once this setting is enabled, the stereo will return to VLine user interface after the reverse.
Let us know if that helped!
In relation to 'my other issue is that my car stereo always launches by going straight to the native Toyota map'
Would look in general settings of the head unit, and you will see an option 'Auto Screen Change'. Change this from Auto to Off (This stops maps being the default screen)
Picture is out of a 16 Lexus NX, yours is likely to be similar
Would look in general settings of the head unit, and you will see an option 'Auto Screen Change'. Change this from Auto to Off (This stops maps being the default screen)
Picture is out of a 16 Lexus NX, yours is likely to be similar